Stop concrete deterioration before it starts, especially in high-traffic and decorative areas! The SEAL product line matches the perfect general use masonry sealant toall your brick, natural stone, tile, and concrete for long term protection against water penetration, mould growth, stain resistance and efflorescence
By penetrating into the capillaries of masonry surfaces, SEAL provides the maximum permanent water resistance to all general use porous masonry substrates. Check out your options:
A permanent water repellent that preserves the natural colour of your material. UNIMIX SEAL S is a solvent-based silane/siloxane impregnant that penetrates the capillaries of masonry surfaces to generate maximum water repellence. Treatment will not significantly change material appearance or vapour permeability.
Recommended Uses:
UNIMIX SEAL S is recommended as a water repellent sealer for porous masonry building substrates such as natural stones, concrete blocks & pavers, clay bricks & terracotta, and tiles & grout. Some important features:
Superb on unglazed materials, UNIMIX SEAL W is also a solvent-based silane/siloxane impregnant that penetrates the capillaries of masonry surfaces to generate maximum water repellence. Treatment will not significantly change the appearance of your masonry works or vapour permeability.
Recommended Uses:
UNIMIX SEAL W is recommended as a water repellent sealer for porous masonry building substrates such as natural stones, concrete blocks & pavers, clay bricks & unglazed terracotta, and porous unglazed tile and grout. Features:
A water-based and colour enhancing solution, PCW 40 E is oil and water repellent and yields excellent stain resistance in the most difficult environments. Like our other UNIMIX SEAL products, PCW 40 E penetrates the capillaries of masonry surfaces to permanently bond with the substrate for maximum protection. PCW 40 E provides a high degree of stain resistance against oil, coffee, wine, tannins, grease, and other tough food stains. This product gives a sophisticated wet-look finish with minimal change to surface texture and vapour permeability.
Recommended Uses:
PCW 40 E is suitable for masonry materials and is best suitable for treating porous coloured masonry substrates such as natural stones, concrete blocks and pavers, driveways, clay bricks, tiles, and grouts and mortars. Some of the important features and key benefits include:
Your permanent grout sealing solution, GroutSeal is a high-quality silane/siloxane water repellent impregnant for masonry building materials. GroutSeal performs anywhere you need to protect grout by deeply penetrating the structure of masonry surfaces for maximum substrate water repellence. Grout is often the most vulnerable to water, efflorescence, and other water-borne stains. GroutSeal treatment will not significantly change the appearance of the masonry substrates and vapour permeability though a slight darkening of the surface may occur for some substrates.
Recommended Uses:
GroutSeal is recommended as a water repellent sealer for tiles and grout. Suitable tiles include ceramic or terracotta tiles as well as concrete or natural stone pavers. GroutSeal is also suitable for other porous masonry building substrates. GroutSeal features include:
New technology for long-term protecting concrete structures from water and chloride ions, Solid Silane SS801 solves run-off and contamination issues with common liquid silane or siloxane treatments. One coat application with better ingredients means easier use and lower labour costs, too.
Recommended Uses:
Solid Silane SS801is used in the treatment of concrete infrastructures such as roads, bridges, wharves, or other concrete substrates to prevent water and chloride ion induced reinforcement corrosion. The product can also be used as a coating primer to significantly increase the durability of the concrete coating system. The silane cream can be re-applied to the treated concrete surface that may be previously treated with either a silane cream or a liquid silane or siloxane product. Features include:
Technical details:
Solid Silane SS801is an innovative aqueous thixotropic silane cream that contains over 80% octyltriethoxysilane and siloxane. Commonly used liquid silane treatments such as iso-butyltriethoxysilane easily evaporate during application and curing resulting in substantial loss of product.
Tests show the long carbon chain octyltriethoxysilane used in the SS801 silane cream provides much longer service life and better alkali stability than the common, short-chain iso-butyltriethoxysilane.
SS801silane cream generally requires only one coat, resulting in both material and application labour savings. More common liquid silane or siloxane products typically require multiple applications to achieve satisfactory performance.
Solve tile and grout leaks and deterioration in one application with Shower Guard, a proprietary polymer engineered together with a deep-penetration delivery system. By reacting deeply into the substrate to form a water repellent matrix, Shower Guard completely seals the material to permanently repel water and protect against mould.
Shower Guard is completely transparent and does not change surface appearance. Unlike most coatings that only seal the surface with a film, Shower Guard penetrates tile and grout to form a thick, permanent and invisible water-repellent barrier.
Most grout used in showers isn’t water repellent, and because it often remains damp, standard grout products provide the perfect breeding ground for mould, fungus, and algae. Shower Guard eliminates the problem easily and economically.
Advantages of using Shower Guard include:
LEN 50 Timber water repellent is a water-based user-friendly sealer based on silicone for treating outdoor timber. LEN 50 penetrates timber grains rendering the timber surface water repellent. Timber water repellent significantly reduces the absorption of water which is responsible for the bulk deterioration of timber substrates. Timber water repellent may also be used for treating other permeable neutral substrates.
Recommended Uses:
Timber water repellent is recommended as a water repellent and sealer for outdoor timber. It may also be used to treat other neutral substrates such as fabric/paper, permeable stones, and polymer render. Some of the important features of timber water repellent include:
Aquron 2000 is the ultimate waterproofing solution for below ground concrete structures.
Aquron 2000 is your premier choice for controlling moisture in concrete beneath floor coverings and coating systems.